Firmware Maintenance 8.2 CD not loading

[KarloChacon · Accepted solution]

here something guys


Advisory: ProLiant Servers with Exactly 64 GB of Memory May Stop Responding While Booting the SmartStart Release 8.10 or the Firmware Maintenance CD Version 8.20

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01554945&dimid=1046218472&dicid=alr_sep08&jumpid=em_alerts/us/sep08/all/xbu/emailsubid/mrm/mcc/loc/rbu_category_AdvisoryProLiant/alerts

[Markus Anthony]

Thanks the previous solution worked for us.
We're using HP BL680c G5 Blade Servers with 65GB of memory. Everytime we booted to the HP Smart Start 8.3 x64 or the HP Firmware Maintenance CD 8.3 we were getting a Blank Screen after the CD reached 100% during it's load process.
The Previous link stated that the issue would have been resolved in future releases of Smart Start from the 8.1 and Firmware Maintenance CD 8.2 versions, but as you can see from the versions I stated we used, the problem wasn't fixed on the newer versions.
Just use the resolution to the problem on the previous link and this will solve your problem.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01554945&dimid=1046218472&dicid=alr_sep08&jumpid=em_alerts/us/sep08/all/xbu/emailsubid/mrm/mcc/loc/rbu_category_AdvisoryProLiant/alerts