HPE Community
ProLiant Servers (ML,DL,SL)
1755668 Members
3144 Online
108837 Solutions
New Discussion

Re: How to do arrange new install Cage SCSI ID for DL380?

 
YANG PING CHIEN
Occasional Contributor

‎02-02-2005 05:51 PM

‎02-02-2005 05:51 PM

How to do arrange new install Cage SCSI ID for DL380?

I have one DL380, it's have a BIOS Warning message. I hope anyone can tell me how to do fix it.

Thanks.

1777 - Slot 0 Drive Array - Proliant Storage Enclosure Problem Detected.

SCSI Port 1 : I/O Board Responding at Wrong SCSI ID.

Check Cables and Storage System I/O Board(s)

0 Kudos
Reply
1 REPLY 1
Vijay_44
Honored Contributor

‎02-02-2005 10:30 PM

‎02-02-2005 10:30 PM

Re: How to do arrange new install Cage SCSI ID for DL380?

Did this happen after added the two bay drive cage to the DL380? I would first check teh cabling:

Basically you need to connect a point-to-point SCSI cable from the controller to bottom connector the 2 bay drive cage and connect another point-to-point SCSI cable from the top of the 2 bay drive cage to the main 4 bay cage. There is also a additional signal cable between the two cages.
There’s your problem!!! This thing is set to EVIL!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.