How to install Ubuntu20.04 on HPE Server using pxe or USB?

[jin2]

I am going to install Ubuntu OS with pxe (using kickstart) or USB. However, both LAN Boot and USB are not recognized.

Model : HPE ProLiant DL380 G10(OS disk is 600GB, Memroy 1.5TB) OS : Ubuntu20.04(Desktop Version)

Can you please help me?

[support_s]

System recommended content:

1. Gen10 Service Pack for ProLiant 2021.10.1 - Release Notes

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

Please check the operating system support matrix, link here and here.
Check this thread which talks about same issue.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[jin2]

Hi

As a result of confirmation, ubuntu 20.04 is in the Support matrix. And it is necessary to install the OS using kickstart, that is, network pxe, not USB.

It does not utilize kickstart to load the kernel (for installation).
The model is DL380 G10 and the BIOS version is U30.

Thank you.

[Suman_1978]

Hi @jin2 

Please check the Kickstart configuration, here are some resources.

https://support.hpe.com/hpesc/public/docDisplay?docId=c03782665&docLocale=en_US
https://help.ubuntu.com/community/KickstartCompatibility
https://ubuntu.com/certified/servers?offset=300

If you think the problem is with HPE Hardware and still need help, please log a support ticket with HPE Support.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases