hp proliant dl360 g7 hdd led is red

[zalaila]

Hi! I have red light on my hp proliant server hdd, but its working without problems, how the server know that hdd are broken, i need understand algorithm, thanks.

[omnix-mm]

Hi,
The server to know HDD status about S.M.A.R.T threshold value.

LED is red Flashing : It is pre alarm of broken.
LED is red Lighting : It is broken.

I'm easy described. Is this ok ?

[Jimmy Vance]

---

zalaila wrote:

Hi! I have red light on my hp proliant server hdd, but its working without problems, how the server know that hdd are broken, i need understand algorithm, thanks.

---

if the server is still functional, one would assume you have some type of RAID configured and this is protecting your data. Most RAID levels (except 0) can handle a single disk failure. You need to determine what RAID level you have configured using a tool like HPSSA or hpssacli (older tools were ACU and hpacucli) once you know what your dealing with you should then replace the faulty drive.

Standard disclaimer when working with any storage: Backup your data!