HP Proliant DL380 Gen9 all 4 lights flashing and not turning on.

[KwadwoAntwi]

HP Proliant DL380 Gen9, all four lights flashing and not turning on.

I did not configure ILO, but the error message is displayed below.

"Post Error:231 DIMM configuration error - No memory is available. If DIMMs are installed, verify that the corresponding processor is installed. - System Halted!"

Kindly help. Memory is installed. 

[support_s]

System recommended content:

1. Advisory: ProLiant DL380 Gen9 Server - Express Bay Enablement Kit Serial Numbers for HP ProLiant DL380 Gen9 Server May Display As All Zeros in HP Integrated Lights-Out 4 (iLO 4)

2. Advisory: HPE Integrated Lights-Out 4 (iLO 4) - iLO 4 Firmware Version 2.50 May Not Include all Integrated Management Log (IML) and iLO Event Log Entries When Downloading the HPE Active Health System (AHS)

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

According to the error message, please check the memory configuration.  You may refer the below links for memory configuration.

HPE ProLiant DL380 Gen9 Server - Configuring Memory
HPE ProLiant DL380 Gen9 Server | Page# 41

Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases