HP proliant Gen10 Server RAM upgrade

[allenmur]

Hi I have been looking to upgrade my ram on the home server which currently only has 8GB and had looked to upgrade it to 32gb.  I  looked at a few modules but the 2 x 16GB modules installed the server powers on as normal bur nothing wont boot. 

When I checked the RAM its PC4 2400T RE1-11 but when chech the RAM currently is PC4 2400T ED1-11 should it need to be this or should it work?

Thanks 

[mysy]

You should check which CPU current your system use.

For E-2100 or E-2200 with DL20 , it need ECC only DDR4,  so the label will be ED1,ED2 or EE1

For other higher model of DL Gen10 like DL380,360 , it request REG-ECC , as RD momery.

They are not same mode , couldn't use together or switch.

[Srinath_Raju]

Hi Allenmur, 

What is the moel of the server? Pleae share with us the part number of the dims installed in the server and the spare dims you have to check it further.

Regards

Sr 

[allenmur]

Hi sorry I should have added this in my orginal post its HPE ProLiant Gen10 X3216 

The RAM HMA82GR7AFR8N-UH TD AA

Thanks 

[Torsten.]

So it is a Microserver Gen10, for supported options see

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00008701enw

[mysy]

mircoserver g10 or g10 plus need ecc only memory,  ED1,ED2 or EE1 kind label.

[Srinath_Raju · Accepted solution]

Hi Allenmur,

Please find below quick specs for your Gen10 server with the details of the supported dims.

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00008701enw#

If you feel this was helpful please click the KUDOS! thumb below!  

Regards

Sr

[protivakid]

What is the difference between ED1,ED2 or EE1 and RD1? All are ECC to my knowledge.