Hp proliant ML110 g6, led amber standby mode

[Anderson11]

Olá família, podem me ajudar a resolver o problema do meu servidor Hp proliant ML110 g6, entrou no modo de espera âmber, troquei a bateria da Bios e nada, limpei a memória e mesmo assim a led standby mode continua âmber. 
Me ajudem porfavor.

Google Translated: 
Hp proliant ML110 g6, amber standby mode led Hello family, can you help me solve the problem with my Hp proliant ML110 g6 server, it went into amber standby mode, I changed the Bios battery and nothing, I cleared the memory and even so the standby mode led remains amber.
Help me please.

[Rakshitha_K]

Hi @Anderson11 ,

LED indicator Amber indicates that the server is in standby mode. In this mode, the main power supply output is disabled. Standby does not completely disable or remove power from the system.

Please try the following steps:

1. Power Cycle: Disconnect the power cords, hold the power button for 5-10 seconds, and then reconnect the power cords. To fully power down the server, ensure the power LED is off and the fan noise has stopped.
2. Check Internal Components: Reseat all internal components and try booting the server.
3. If the issue persists, remove all components except the processor and a memory module and check if the server boots.
4. iLO: If the server is managed remotely, connect via iLO to see what's happening on the console screen.
5. Power Supply: If the server is not powering on at all, check the power supply.

Please refer to HPE ProLiant ML110 G6 Server Maintenance and Service Guide for more information.

Regards, 
Rakshitha_K

[support_s]

System recommended content:

1. ProLiant ML110 Server Operations and Maintenance Guide

2. ProLiant ML110 Server Network Operating System Installation Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TVVJ]

Hello,

Check the status of the LED on the system board. In the maintenance and service guide referred to above, on page 110 is a description of the LEDs and their status.

It may help in isolating the issue.

Regards,

[Rakshitha_K]

Hi @Anderson11 ,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Regards,
Rakshitha