Hpe disk

[ibrahimnex]

On an HPE DL385 Gen10 Plus server, there are currently 4 TB SAS disks installed. If I remove these and replace them with 20 TB SAS disks, will they work?

[prajwal_ds · Accepted solution]

Hi ibrahimnex,

Yes, you can replace the 4TB SAS disk with a 20 TB SAS disk in the HPE ProLiant DL385 Gen10 Plus server.

1) Refer to the QuickSpecs document (page no.8) for supported disks.

2) Please note that you must back up the RAID configuration and data before replacing it.

Hope this information has helped you, Please click on the "Thumbs Up/Kudo" icon as a token of appreciation. Also, if this post has helped to solve your issue, consider marking this as an "Accepted Solution".

Regards,
Prajwal D S