HPE ML Gen10 Tower to Rack Conversion Kit SKU: 874578-B21 for HPE ML30 Gen10 Plus

[Abdi_A]

Hello,

I've got a ML30 Gen10 Plus server recently and ordered the HPE ML Gen10 Tower to Rack Conversion Kit
SKU: 874578-B21 which is recommended when ordering a new quote.

But the server is quite a bit smaller than the one displayed in the video https://www.youtube.com/watch?v=2PlzFPMJYhU.

Is there another part that fits? As this comes directly from HP's own site for this server.

Thanks.

[support_s]

System recommended content:

1. HPE ProLiant ML30 Gen10 Plus Server User Guide | Tower-to-rack conversion kit

2. HPE ProLiant ML30 Gen10 Plus Server User Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

According to the QuickSpecs for this server, the conversion kit part number is correct.  Page# 21 & 30

The YT video you posted is for ML350 which is a bigger version..

Unfortunately, I could not find any videos or pics for your model of server, tower to rack conversion.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[BananaJack · Accepted solution]

I installed my HPE ML30 G10 (P06761-B21) onto an HPE Tower to Rack Conversion Kit with Sliding Rail Rack Shelf and Cable Management Arm (874578-B21) and it worked fine. As you say, the ML30 is smaller than, say, the ML350 but it still sits on the tray ok and the tray's integral rubber mat keeps it from moving anywhere.
There's a small bracket at the rear of the rack shelf which is intended to be screwed to the rear of the server but there are no holes on the ML30 G10 to make this possible, so the server is held in place using gravity and friction alone. The quality of the tray is excellent so I'm happy with the installation.