HPE ML350 Gen11 GPU Power Cable

[edmcIT-Holger]

I would like to connect my grafik card in the riser board with Power.
(HPE NVIDIA Quadro M4000 graphics accelerator)

With the GPU auxiliary power cabling infomation in the specs it will not work because i have only some VBU connector (OCP1) on board.
What kind of cable do i need and what ist the rigth part number?

thx

[support_s · Accepted solution]

System recommended content:

1. Compaq ProLiant ML350 Setup and Installation Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Cali]

Hi,

supported GPU Cards and needed Power Cables for this Server are listed in the QuickSpecs here: https://www.hpe.com/psnow/doc/a50004308enw.html

See section: HPE Computation and Graphics Accelerators
However, your GPU Card is not listed here; maybe any of these GPU Power Cables works for you.

Cali

[edmcIT-Holger]

Thank you so much!

P47221-B21 is the best cable for us.
After more than 3 hours of searching, I had almost given up hope

[Sunitha_Mod]

Hello @edmcIT-Holger,

Perfect! 

We are glad to know your concern has been addressed.