HPE PROLIANT GEN 10 PLUS DP OUTPUT

[wanfosin]

i was unable to have any output from the DP 1.0 Port to any monitors.

The monitors was tested to be working with outher devices.

Would anyone able to suggest how to test the DP port to see if it is working?

I had tried using active DP to DP cable and other adapters.

[support_s]

System recommended content:

1. HPE ProLiant DL365 Gen10 Plus server

2. HPE ProLiant DL360 Gen10 Plus server

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[wanfosin]

How do I determine whether it is DL 365 or DL360.

I am unable to tell other that it is HPE ProLiant Gen 10 Plus

[Cali]

Hi,

the DL365 is an AMD and DL360 an Intel CPU Server.
You can also provide the Part Number, it is on the Sticker or Pull Tab (P/N: xxxxx-xxx).

With DP you mean a Display Port?
To understand correctly, the Server has a VGA Port (6) and you want to attach a Monitor with DP Port only by using a VGA to DP Adapter right?

Cali

[Casper42]

$5 says it's a MicroServer Gen10 Plus.

See this existing thread:

https://community.hpe.com/t5/ProLiant-Servers-Netservers/HPE-Microserver-gen10-no-video-on-displayport/td-p/7088061

[ksram]

Hi,

We see for Microserver Gen10+ it has Display Port 1.1a.

Please confirm if the Monitors are supported.

If yes and if the problem appears only at Port level, you may try updating BIOS and iLO, reset BIOS and or Restore BIOS to Factory Settings.

If still appears, it may need replacement may the Port has gone faulty.

Thank you

RamKS

[wanfosin]

I recently updated the driver and now there is no more issue with the VGA port and there is display outout on the monitror.  I was happy with it.  However, there is still no output from the DP to the same nmonitor.  I will try updating the BIOS later.