HPE Smart Array E208i Array failed but all disk OK

[Kissnofrog]

Hello,

I got an issue with my RAID. 

When I'm checking the status of my Array in ssacli I get the following:

HPE Smart Array E208i-p SR Gen10 in Slot 1

   Array A (Failed)

      physicaldrive 1I:0:2 (port 1I:box 0:bay 2, SATA HDD, 6 TB, OK)

      physicaldrive 1I:0:3 (port 1I:box 0:bay 3, SATA HDD, 6 TB, OK)

      physicaldrive 1I:0:4 (port 1I:box 0:bay 4, SATA HDD, 6 TB, OK)

so all the disk are ok but the array is not.

What can I do about this? Anyway to reactivate it without loosing data?

Thanks for your help!

David

[support_s]

System recommended content:

1. HPE OmniStack 4.1.3 for vSphere Release Notes

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[SydUmar_1]

Hello @Kissnofrog 
Could you check for any entries in the iLO and in the Integrated Management Logs to indicate if there are any errors being reported?

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.