i have two SAS array A and B configured respectively with 300GB two HDD and 1.2TB HDD

[Yogeshd]

i have two SAS array A and B configured respectively with 300GB two HDD and 1.2TB with 3 HDD i got HDD failed error 3I:1:4 .

How can i identify from this 3I:1:4 which HDD is failed as there is no red or amber light for the HDD.

is there any other way to exactly find out which HDD is failed so that i can replace them.

[TVVJ]

Hello,

Please launch the HPE Smart Storage Administrator.

Select "Configure", and then select the controller.

Next select the array in which the hard drive is part of.

Then select the physical drive designated as "3I:1:4".

Select, "Identify Device" to cause the drive's LED to flash.

Before performing the above procedure, ensure there is full backup of server data.

Regards,

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".