Query: iLO Amplifier v2.23 Baseline Import Fails.

[Ghenckert]

Goo day all,

I am trying to upload the new P81142_001_gen10spp-2025.03.00.00-SPP2025030000.2025_0319.35.iso to the iLO amplifier v2.23. However as I try via NFS or File upload - it fails. I tried renaming the file to something shorter - without success.
I cleared out and deleted the previous SPP that was uploaded - space is sufficient.

This is what I get from the error log:

Kind reg,

G

[support_s]

System recommended content:

1. HPE iLO 5 1.40 User Guide | iLO Amplifier Pack

2. HPE iLO 5 User Guide | iLO Amplifier Pack

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[shiva_jr]

Hi @Ghenckert , 

    Baseline import may fail for the following reasons -
1) Network issues :
    Solution : Check the network configurations, communication ports are open/blocked, firewall is stopping traffic, Proxy configuration required.

2) Baseline path may be incorrect:
    Solution : Verify again the path of baseline and is accessible.

3) Download Basaline may be incorrect. 
   Solution: The baseline that you mentioned is compatible with HPE Gen10 Servers. Please verify the server is Gen10 model

   I hope this post helps you. If it does, please consider awarding 'Kudos' and marking my post as an 'Accepted Solution'.

Regards,
Shiva_jr

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

[Ghenckert]

Hi @shiva_jr ,

thank you for your reply. However:

1) Checked firewall and ports. All good

2) Baseline path verified many times. Import fails on direct file upload function or NFS upload.

3) Servers are GEN10 - and the basline import AFAIK is independent of server OS?

I am talking about the iLO Amplifier VM v2.23

Kind reg,

G