ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Federation: no peers

 
Highlighted
Advisor

ILO Federation: no peers

Hi,

I'm trying to setup ILO Federation for a couple of DL380Gen10 server. I did not change much on the iLO Federation page, I can't see any other devices. I created a new group, chose a key, and configured this group an 3 ILO's. But they just don't see each other. ILO configuration is IPv4. Do I have to add an IPv6 address for this to work? iLO's are in the same VLAN. I don't know for sure if IPv6 Multicast is enabled. Isn't there an option to add IPv4 addresse manually to get this to work?

2020-05-06 11_29_10-EFSE - ASG-RemoteDesktop 2017 - __Remote.png2020-05-06 11_30_18-EFSE - ASG-RemoteDesktop 2017 - __Remote.png2020-05-06 11_31_15-EFSE - ASG-RemoteDesktop 2017 - __Remote.png

 

 

2 REPLIES 2
Highlighted
Visitor

Re: ILO Federation: no peers

Highlighted
Advisor

Re: ILO Federation: no peers

I already know this document and the FAQ. But this did not help.