ProLiant Servers (ML,DL,SL)
1834651 Members
2242 Online
110069 Solutions
New Discussion

ilo5 snmp no longer reporting

 
Throwaway
Occasional Advisor

ilo5 snmp no longer reporting

I have a few ilo5 units that are no longer reporting hardware issues through SNMP to my monitoring system. All the units stopped reporting within a few days of each other. I suspect this issue might be related to a recent firmware update.

When running an SNMP diagnostics test on the ilo units, it returns "unknown username".  but I can confirm that I haven't changed the snmp v3 configuration on the iLO units or the configuration on the monitoring system..

I found a few other threads about snmp, but I am not 100% if it's the same problem..?
Firmware Bug with SNMP (ILo 5, 3.0.0) , ProLiant D... - Hewlett Packard Enterprise Community (hpe.com)
iLo 5 firmware 3.03 Mar 27, '24 - what's new? - Hewlett Packard Enterprise Community (hpe.com)

If my problem is the same as the two above, please add me to the list. Let me know when snmp is fixed asap. Please I need priority on this.

3 REPLIES 3
Suman_1978
HPE Pro

Re: ilo5 snmp no longer reporting

Hi,

I think this is the advisory for your issue.  HPE Integrated Lights-Out 5 (iLO 5) - SNMPv3 Request Setting Defaults to Disabled After Upgrading iLO 5 Firmware to v2.90 (or later).

Thank You!
I work with HPE but opinions expressed here are mine.



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Throwaway
Occasional Advisor

Re: ilo5 snmp no longer reporting

I have checked on my end, and found some where the option snmpv3 request was actually disabled, but also some where it was enabled.

enabled it on all, and disabled then enabled it again on those where it was already enabled.

need to wait and see if I get my hw reports..

Throwaway
Occasional Advisor

Re: ilo5 snmp no longer reporting

@Suman_1978 

We are getting data through SNMP now, but some OIDs seem to be no longer valid..?
For example we are no longer receiving temperature data.

Firmware Bug with SNMP (ILo 5, 3.0.0) , ProLiant D... - Hewlett Packard Enterprise Community (hpe.com)

iLo 5 firmware 3.03 Mar 27, '24 - what's new? - Hewlett Packard Enterprise Community (hpe.com)

Known issue?