ILO5 ver. 3.05 - access via IPv4

[Sunitha_Mod]

Hello @tjcolby13,

We regret the inconvenience caused.

We request you please take a moment to reply to the private message we've sent and provide the requested information. This will enable us to address your concerns with the relevant team.

[Jiri3]

Hi  tjcolby13,

me too. Upgrade 3.04 -> 3.05 -> 3.06 and downgrade 3.06 -> 3.05 -> 3.04 work normally without crash, even repeatedly. And to the fact that access to iLO via IPv4 only works on version 3.04.

I have submitted case and wait...

Jiri

[SimeTom]

Update on this issue.

I upgraded ML350 Gen10 iLO (shared network port) from 3.04 to 3.06 and found out that I can access iLO from local network (subnet) but I have lost access from internet (port forwarded https). I didn't chaange any of iLO's network configuration. I have checked that everithing is still set up correctly (IP, mask and especially GW).

In threads i have read that there are open cases with HPE support on this issue. Are there any responses or solutions?

Regards Tomaž

[thutchings]

Hello,

Yes, this is being worked on by HPE and a fix will be coming soon. The workaround, for now, is the backrev the iLO firmware to, at least, version 3.04.

Regards

[Jiri3]

Hello Thutchings (and everyone else,),

I confirm that version 3.07 is released and access via IPv4, and via IPv6 too, works.

Thank you very much

Jiri3

[SimeTom]

I'm confirmig too that update to 3.07 worked on at least ML350 Gen10 and ML110 Gen10.

Thank you HPE.