ProLiant DL380 Gen10 Secondary Riser Card

[CRD]

Good day

Does anyone perhaps have the correct part nr to order for a ProLiant DL380 Gen10 Secondary Riser Card? I have checked the quick specs but there are several different types.

Just want a secondary riser card to install a PCi Fibre Channel Card on and the Primary Riser card is already fully populated. I checked on the Primery Riser card and I see 2 part numbers:

1. Replace with HPE spare: 875056-001

2. Assembly P/N: 871820-001

Dont know if I can just order one of these and it will work or is the secondary riser card a totally different part number.

Thank you

[support_s]

System recommended content:

1. HPE ProLiant DL380 Gen10 Server - Spare Parts

2. HPE ProLiant DL380 Gen10 Plus Server - Option Parts | HPE I/O Expansion Options

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[rabindra11sharm · Accepted solution]

Dear CRD

As per your provided information, It showing only Primary raiser cage part no. 875056-001. Now you want to install secondary raiser card for your server. There is three type of raiser cage assy can be supported here.  Recomended for HPE DL Gen10 x8/x16/x8 Riser Kit: 870548-B21

HPE DL38X Gen10 x16/x16 Riser Kit Notes: 826694-B21 

Slot 1 (Top slot) and 2 (Middle slot) available in Secondary riser location.

NMax Qty=1 Double-wide Accelerator/GPU can be populated.

Supports Full Height and Full length cards.  Bus width x16, x16, Connector Width x16, x16.

HPE DL Gen10 x8/x16/x8 Riser Kit: 870548-B21

Slot 1 (Top slot) and 2 (Middle slot) and 3 (Bottom slot) available in Secondary riser location.  No M.2 support on this riser.  Supports Full Height, Half- length cards, Full Height, Full-length cards and Full Height, Half- length cards.   Bus width x8, x16, x8, Connector Width x8, x16, x8.

HPE DL38X Gen10 4-port 8 NVMe Primary SlimSAS Riser: 867807-B21

Riser supporting up to 8 NVMe drives in Primary location. All PCIe lanes dedicated to NVMe; no additional slots available for expansion via stand-up cards in the Primary riser location.  Replaces the default Primary riser  This can be connected to an 8SFF NVMe drive cage in box 3.  To achieve max 20 NVMe support, connect 4 NVMe drives to the tertiary riser.

[CRD]

Thank you very much, then its this one = HPE DL Gen10 x8/x16/x8 Riser Kit: 870548-B21

[Cali]

870548-B21 is the most popular.

Please be aware, that the Secondary Riser needs the Secondary CPU also.

Cali

[CRD]

Noted thank you Cali

[Sunitha_Mod]

Hello @CRD,

That's Awesome! 

We are happy to hear your concern has been addressed.