Innovation Engine Installation

[Jiri3]

Hi Friends,

installation Instructions for Installing IE in G10 are written:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

However in ILO-5 Userguide are written:
These firmware types require that you power off the server before installation. The changes take effect after you power on the server. Power off the server and wait 30 seconds if you will update...

What is right?

Jiri

[Torsten. · Accepted solution]

Different file formats, different instructions.

There is (maybe was) a *.bin format for install via ILO in powered off status.

Nowadays there is probably only the *.rpm format for use with SPP or in Linux directly - off course while running.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_13c53b2245aa41cd85f32655aa#tab2

here is the old *REMOVED* version with a *bin file:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-8340068d1b734d5ea9a07a29a9#tab3

[Jiri3]

Hallo Torsten,

thank you for the quick answer

Jiri

[Wilom]

Intelligent provisioning remove

Some one has tha knowlegde how to remove the intelligent provisioninf from a DL GEN10 system