ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Installing Server 2008 x64 R2 on RAID

 
Highlighted
Occasional Visitor

Installing Server 2008 x64 R2 on RAID

Hi,

I've used the HP SmartStart disk to create and configure a RAID array and then proceeded to install MS Windows 2008 x64 R2 on the drive.

During the first boot of the installation it fails and reboots the server, then displaying the "the OS failed to boot, select normal, safe boot to continue" message.

Can someone advise please?
Thanks,
Rich.
7 REPLIES 7
Occasional Visitor

Re: Installing Server 2008 x64 R2 on RAID

Sorry I forgot the server specification!

HP ML310 G5P X3220
Highlighted

Re: Installing Server 2008 x64 R2 on RAID

Hi richard,
this try. enter the RBSU,
Boot controller order > Controller card firt set.

Controller card model ?

Regards
Erdogan
Kind Regards,
Erdogan.
No support by private messages. Please ask the forum!

Accept or Kudo

I am HPE Employee
Highlighted
Occasional Visitor

Re: Installing Server 2008 x64 R2 on RAID

Hi Erdogen,

The model is Intel 82801GR SATA RAID

Thanks,
Rich.
Highlighted

Re: Installing Server 2008 x64 R2 on RAID

Hi,

Use this driver 2008 x64 R2 installation.
HP Embedded G5 SATA RAID Controller Driver for Microsoft Windows Server 2008 x64 Editions

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3580655&prodNameId=3580656&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=MTX-89b748fe8b0b4011b87a63053d

That will also fix the problem :) Remember to assign points to answers that helped in your problem. So the forum stays alive...
regards.
Kind Regards,
Erdogan.
No support by private messages. Please ask the forum!

Accept or Kudo

I am HPE Employee
Highlighted
Occasional Visitor

Re: Installing Server 2008 x64 R2 on RAID

Cheers.

Can I use these driver in the currently half-installed state or do I need to start again?

Also should I go for an install using only the Windows disk?

Thanks,
Rich.
Highlighted
Occasional Visitor

Re: Installing Server 2008 x64 R2 on RAID

I've definately got Windows Server 2008 x64 R2 installed.

The message I get when trying to install those drivers on Windows (booting with one disk - RAID off) is that the drivers are not for the version of Windows that is installed.

Highlighted
New Member

Re: Installing Server 2008 x64 R2 on RAID

I am trying to reinstall server 2008 R2 (64). I have the original disks etc but it still can't find the raid drivers. I realise that the operating system is way out of date, but I run a specific application on it. The link to the drivers is invalid now. Do you know where I might still get them. I've tried using the HP Smartstart we got with it and the Server 2008R2 HP DVD, even set the date back a bit.. LOL

I'd like to keep the server as its been a great performer, but after putting in new (Identical) drives, creating the arrays and logical drives I just can't get past the driver screen when installing windows

Help