INTALLAZIONE PROXMOX VE CON HPE NS204i-u Gen11 Boot Controller

[sandroRYS]

Buongiorno,

vorrei installare PVE su server HPE DL380 gen11, ho un NS204i-u Gen11 Boot Controller.

C'è un modo per poter utilizzare il controller senza il raid 1? Dalle impostazioni bios non c'è modo di distruggere il raid.

Vorrei installare pve su un disco nvme del controller NS204i-u e utilizzare il secondo disco nvme per destinare il BD e il WAL. Come potrei fare?

Grazie

**Google Translate**

Good morning,

I'd like to install PVE on an HPE DL380 Gen11 server. I have an NS204i-u Gen11 Boot Controller.

Is there a way to use the controller without RAID 1? There's no way to destroy the RAID in the BIOS settings.

I'd like to install PVE on an NVMe drive on the NS204i-u controller and use the second NVMe drive for the BD and WAL. How can I do this?

Thanks

[Azr_geek · Accepted solution]

Hello @sandroRYS,

You cannot use the two SSDs inside the NS204i-u as independent drives (one for boot, one for BD/WAL) because the module is designed to force a mirrored RAID1 for boot only. But you can absolutely use it for boot, and then separately use other NVMe drives for your BD/WAL storage. That gives you the architecture you want: a dedicated boot device (redundant) + separate high-performance NVMe storage for PVE’s data layer.

Regards,
Azr_geek

[sandroRYS]

Thank you

[Thaufique_Mod]

You're welcome and glad to know this was resolved.