ProLiant Servers (ML,DL,SL)
1845562 Members
2754 Online
110245 Solutions
New Discussion

Integrating SPP 2014.10

 
LeoKurz
Occasional Advisor

Integrating SPP 2014.10

Hello,

 

is there a way to integrate SPP2014.10 in 2014.09 so you are able to do the (offline) updates in on go?

 

Thanx.

 

__Leo

2 REPLIES 2
TVVJ
HPE Pro

Re: Integrating SPP 2014.10

You may refer to steps in "SPP staging procedures > Adding or removing components from an SPP" in the HP Service Pack for ProLiant Quick Start Guide for further instructions. Click here for the document.

 

Hope this helps you!

 

 

Regards,

 

Vijayasarathy

 



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[All opinions expressed here are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Torsten.
Acclaimed Contributor

Re: Integrating SPP 2014.10

Since you asked for the offline updates ...

 

Let's say a new ILO versions comes out - you can add the *.scexe file into the hp/swpackages directory as a supplement. It will be detected during the inventory.

So you can do the same with all the *.scexe files from the supplement bundle, same procedure, since there are no real dependencies between the components.

It's different from online updates with software included, but in offline you do firmware only.

 

So if you have created an USB key drive, just add the files.

 

BTW, ILO4 version 2.03 is available.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!