Intelligent provision not working- ML310e Gen8 V2

[RajeshPalayatu]

Dear all,

I am using HPE Proliant  ML310e gen V2 Server. Recently I deleted my raid configuration and tried to create a new one. When I restarted and tried to log in to Intelligent provisioning but It was not working.

first, it shows " GRUB LOADING " after pressing F10,

Then I installed Intelligent provisioning as per the HP instruction ( Versions - 1.5, 1.6, 1.7). The installation was successful, and the GRUB LOADING error is gone. 

But not it is stuck on the black screen with a blinking cursor after pressing F10. Kindly help me out to solve this issues.

[AmRa]

Try below steps to resolve Intelligent Provisioning issue:

1. Reset iLO from iLO diagnostic page.
2. Clear NVRAM using switches 1 & 6 together.
3. If it still does not work, reflash Intelligent Provisioning (IP) to the latest available version.

Intelligent Provisioning Recovery Media:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a2b2caf8066e4a8b82a966d628#tab1

[Ballardin]

performing the procedures below did not resolve.
Is there any way to do a 100% reset to factory defaults on the motherboard?

[Sunitha_Mod]

Hello @Ballardin, 

Thank you for posting! Since you have posted in an old topic and there is no response yet, I would recommend you reate a new topic using the create "New Discussion" button, so the experts can check and guide you further.