ProLiant Servers (ML,DL,SL)
1748089 Members
5026 Online
108758 Solutions
New Discussion юеВ

Re: iSCSI boot Proliant gen10 using Software Initiator an linux target

 
darek_top
Advisor

iSCSI boot Proliant gen10 using Software Initiator an linux target

Hi All,

Has anyone tested booting Proliant  ML or DL Gen9 or Gen10 server from linux iSCSI target using Software Initiator? With no iSCSI dedicated NICs. ex. P11051?

I'm stuck at UEFI initialization with IML entry:

[UNKNOWN] 69 iSCSI Error - iSCSI login failed.

And target logs:

Oct 26 16:00:31 XXX tgtd: login_start(499) Target iqn.2015-10.com.XXX is RDMA, but conn cid:1 from iqn.2015-02.com.hpe:uefi-XXX is TCP
Oct 26 16:00:31 XXX tgtd: conn_close(101) connection closed, 0x1e9b208 1

Target config as follows:

Target 3: iqn.2015-10.com.XXX
    System information:
        Driver: iser
        State: ready
    I_T nexus information:
    LUN information:
        LUN: 0
            Type: controller
            SCSI ID: IET     00030000
            SCSI SN: beaf30
            Size: 0 MB, Block size: 1
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            Backing store type: null
            Backing store path: None
            Backing store flags: 
        LUN: 1
            Type: disk
            SCSI ID: IET     00030001
            SCSI SN: beaf31
            Size: 53687 MB, Block size: 512
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            Backing store type: rdwr
            Backing store path: /dev/XXX
            Backing store flags: 
    Account information:
    ACL information:
        ALL
5 REPLIES 5
AmRa
HPE Pro

Re: iSCSI boot Proliant gen10 using Software Initiator an linux target

May I know the server model number and which network adapter you are using to establish ISCSI connectivity?

I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo
darek_top
Advisor

Re: iSCSI boot Proliant gen10 using Software Initiator an linux target

ProLiant DL380 Gen10 868703-B21 + HPE 10GbE 2p FLR-SFP+ X710 Adptr 727054-B21.
I know, it's not in the compatibility matrix on SPOCK.

AmRa
HPE Pro

Re: iSCSI boot Proliant gen10 using Software Initiator an linux target

Based on HPE Ethernet 10Gb SFP+ Adapters quickspecs, ISCSI feature is not available on HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter (727054-B21).

Please refer HPE Ethernet 10Gb SFP+ Adapters quickspecs (Page Number 5) for more information.

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00047734enw&doctype=quickspecs&doclang=EN_US&searchquery=&cc=my&lc=en#

I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo
darek_top
Advisor

Re: iSCSI boot Proliant gen10 using Software Initiator an linux target

OK, but that was not the question.

The other question is why software initiator confguration allows configuration od incompatible NICs in RBSU?

AmRa
HPE Pro

Re: iSCSI boot Proliant gen10 using Software Initiator an linux target

Have you checked by updating NIC driver and firmware to latest.

 

Also may I know the OS version installed on this server.

I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo