LLDP on ILO 5

[jul-deb]

Hi,

I'm looking for information about enable LLDP on an ILO 5 dedicated port on a HPE Proliant DL360 gen 10 server.

Is LLDP work on ILO 5 ? If yes, how can I enable it?

Kind regards,

Julien

[Ihaqueit]

Connect iLO to the network through a production network or a dedicated management network.

If you need more information better to post the query on Network community.

[jul-deb]

Hi Ihaqueit, Hi community,

My ilo port is connected on my network (and up)   but doesn't answer to LLDP request made by my switch. Do you know if LLDP can be enable on a dedicated Ilo port?

I would like to use Link Layer Discovery Protocol (LLDP) to get information about the server connected on each ports of my switch.

thank you for your help

Julien

[Ihaqueit]

To enable the LLDP, perform the following steps.

1. Press F9 at POST.

2. Select network adapter.

3. Select enable LLDP.

4. Save and reboot

[Ihaqueit]

Checkout this,

To enable the Link Layer Discovery Protocol (LLDP), perform the following
steps:

1. Press F9 at Power-On Self-Test (POST).
2. Select Network Adapter.
3. Select enable LLDP.
4. Save and reboot.

[jul-deb]

Hi Ihaqueit,

Thank you for your answer. My need is to enable LLDP protocol on a dedicated Ilo ports and not on a NIC of my Porliant DL360 Gen10 .

Do you know if LLD can be enabled on ILO5 dedicated port?

ILO firmware version is "2.55 Oct 01 2021"

Thant you for your help,

Julien

[Ihaqueit]

Use iLO Dedicated Network Port—Uses a NIC with a jack on the back of the server.The NIC handles iLO traffic only.

Better you raise a case with HPE support.

[AmRa]

Hi 

Based on HPE Integrated Lights Out (iLO 5) for Gen10 Servers - Configuring iLO Network Settings article., there is

setting available to enable LLDP on ILO NIC. 

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00026106en_us

However please raise support ticket with HPE technical support team for more information.

[ranjeetbadhe]

There is no such option in ILO to enable LLDP