Looking for Visio Templet

[Ayman Altounji]

I looking for Visio stencil for ML350, if any one can help!

Thanks
Asif

[Mark Cloutier]

I have some for you. Please provide me your e-mail address and what type of products you are looking for.
Thank you.

[Ayman Altounji]

Did you ever recieve the stencils you were looking for... if you did can you see if they included the CL380 server. If so, can you email them to me.
Appreciate it.
et

[Mark Cloutier]

All I have for a cluster is the CL1850.
Can I have your e-mail address please if you would like this.

[Ayman Altounji]

I could also use one of those stencils if you've got them?
Waters@ci.edmonds.wa.us

[Ayman Altounji]

Can you sent me some to?

greetings,

vincent

[Ayman Altounji]

I'm looking for the DL380 and Storageworks components. Please email them to me if you have them. I really appreciate it! Thanks!

[Ayman Altounji]

I've been looking for stencils for the DL380 (G1 and G2),DL580's (G1 and G2) and DL760's (G1 and G2). My email is mark.scheuber@mu.edu. If someone could send these to me that'd be great. Thanks in advance.

- Mark

[Mark Cloutier]

There are a lot of these stencils.
Are you looking for something specific?

[Mark Cloutier]

rcummings1, can I have your e-mail address please.

[Ayman Altounji]

I am aslo looking for the following stencils for rack servers:
DL380
ML530
PL1600
5500
3000
If you have any of these, please email to: michelled@lorman.com

[Ayman Altounji]

Hi, I'd really appreciate Visio stencils of the DL380 G2 Packaged Cluster, DL380 G2, DL320 G2 & DL360 G2.

Have you got any StorageWorks stencils too?

Thanks in advance, Andy Pegg (somegieza@yahoo.com)

[Jared Goldstein]

I am looking for visio templates for the following machines:

NetServer LXR Pro
Compaq Proliant 6500
NetServer Rack Storage 8
NetServer LXR Pro 6/200
SureStore 2/20 tape library
HP Fibre Channel Hub Model # D6976A


Any help would be greatly appreciated!

Thanks,

Jared

[Marc Eastburn]

Jared,

You should be able to find most if not all of the stencils you require here
http://www.sisp.hp.com/SISP/LoginFrame.tcl?area=stencils&doc=info/VisioStencils

[ITeam]

Problem with that link is that it does not include any recent Compaq/HP proliant products (ML360, DL760 for example).

Anyone got copy of the more recent products? Sure this would be appreciated by many of us on the forums!

Thanks,
Paul.

[ITeam]

Sorry - forgot to include an e-mail for that previous plea for templates ...

paul.mann@alphameric.com

[Mike Lauffenburger]

I am looking for DL580 G2 template and the HSG80 Controller in the Model 2200 bulkhead.

Thanks,
mike.lauffenburger@bristolwest.com

[Kirk Hilzinger]

I, too, am looking for updated Visio shapes. Mainly, I deal with servers, printers, and Procurve network equipment. Thanks. My E-Mail address is kirk.hilzinger@xeta.com.

[Jesse Grigsby]

http://www.mvps.org/visio/3rdparty.htm Check out this website, i got the ML350 and ML570 server stencils from there.

[Kai-Uwe Schurig]

A great collection of visio shapes for hp and compaq equipment can be found at http://www.visiocafe.com/hp.htm

Regards,

Kai-Uwe