Memory configuration in DL360 Gen9 with two E5-2690 v4 cpus

[gunnar-hro]

Hello dear community,

I've a problem with my server.
I've  DL360 Gen9 with two sockets (Xeon E5-2690 v4).
Now I'm trying to expend the memory ( 8 * 16GB = 128 >>> 192 GB) with 2 x 32 GB bars.
After I studied the guide "HPE ProLiant DL380 Gen9 Server - Configuring Memory" , I pluged in the two bars in slot 11. But after starting the DL-server, I'm get this messege in iLO:

"POST Error: 207-Invalid Memory Configuration - Processor 1, DIMM 11 incorrectly installed. Please refer to Memory Population Rules in Documentation. This Memory will not be utilized."
"POST Error: 207-Invalid Memory Configuration - Processor 2, DIMM 11 incorrectly installed. Please refer to Memory Population Rules in Documentation. This Memory will not be utilized."

Here in attachment a screenshot of my memory configuration. What is my mistake? Does I've got to less bars (4x 16 and not 2x 32GB)?

Thanks a lot for any help.

[ronissac · Accepted solution]

Hi Gunnar , 

Kindly install the 32 GB DIMMs in Socket 12A on both the processors. Please find the recommended memory configuration in the attached picture

If you feel this was helpful please click the KUDOS! Thumbs below!

Regards

Ronny

[Gunnarson]

Hi Ronny,

Thank you very much, your memory configurations runs without ilo warning ;)