Microserver Gen8 System Power Fault

[Freeuser8834]

3 days ago, I have sucessfully power on the server and able to boot into the system. Today, I found that it fails to boot up but able to access the iLo. The IML displays "System Power Fault (XR: 20 00 MID: FF F5 FE 01 FF FF FF 06 06 00 00 02 01 05 40 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00)". Is there any hardware issues?

The following is the detail of the Mainboard I have checked in the iLo.

iLo Firmware Version: 2.82

System ROM: J06

Please advice

[shiva_jr]

Hi @Freeuser8834 ,
    There may be power supply issue or any hardware components might be failed or not seated properly.
     The components could be Riser kit, DIMM slots, processor slots, HDD backplane.
     Please verify the hardware devices again, reseat the all components. Still the issue remains, make the minimum hardware configuration and power ON.
Regards,
Shiva_JR