ML110 Gen 11 onboard RAID controller only seeing 4 of 5 drives.

[lahvymtlfan]

I have a brand new ML110 with 5 SSD's installed.  Initially i had to turn on Intel VROC inside the BIOS for the drives to be visible.  Now I am able to see all 5 drives, however there appears to be two different RAID controllers listed.  One is listed Wellsburg sSATA RAID Controller which has 4 of the 5 drives, and second is Adapter: Intel Corporation with one of the drives listed.

Here is pic.

[support_s]

System recommended content:

1. ProLiant ML110 Server Operations and Maintenance Guide

2. ProLiant ML110 Server Network Operating System Installation Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[BPSingh · Accepted solution]

Greetings!

Greetings!

Please use RBSU to configure RAID. 

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00002239en_us&page=GUID-A395CF6F-8615-4F8B-A4C7-A869BE5CA1D5.html

Also all models feature embedded storage controller that supports SATA RAID with up to 4+4 LFF or 8 SFF drive and 2xM.2 SATA drives. Each LFF drive cages are separated drive groups, SFF drive cage also separates to two drive groups (Bay1-4 and Bay5-8) and 2x M.2 SATA drives from onboard slots. 

Please refer page#7 on the server quickspecs. 

https://www.hpe.com/psnow/doc/a00054055enw.pdf

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.