ML150 G6 & Server 2008 R2: "Storage Agents: Accelerator Board Status Change"

[Wildi Martin]

Hi

Every time i reboot this server i receive a Status Trap:

The system has detected the following event:
SNMP Trap: 3038
Date time: 10/13/2010 03:21:39 AM
Computer: SERVER.domain.local
Source: Storage Agents
Type: Informational
Category: (4)

Description:
An 'Accelerator Board Status Change' trap signifies that the agent has detected a change in the status of an array accelerator cache board.

Details:
IDA Accelerator Status 'INVALID'
MEMORY 0
Controller Slot # 4
Model 38
Serial Number ''

In the system management homepage i do see the logical drive on this controller with status "Accelerator: Disabled". Do i have to enable it? where?

Thanks.
Martin Wildi

[Jan Soska]

Hello,
i seems you cache battery "past away". If your server is still in warranty, contact hp support.

Jan

[CTS-Tech]

I am having this same issue with 2 different ML150 G6 Servers (new).

It happened when I enabled write caching in the ACU.

What was your resolution?

[Suman_1978]

Hi,

Its either an issue with Battery or Cache memory attached to the controller.

Before replacing any part, update the firmware on the controller to the latest and test.

Thanks