HPE Community
ProLiant Servers (ML,DL,SL)
1823246 Members
3371 Online
109648 Solutions
New Discussion

Re: ml330 g3 mirrored drives (raid 1)

 
Richard Barsorian
New Member

‎02-14-2008 02:17 PM

‎02-14-2008 02:17 PM

ml330 g3 mirrored drives (raid 1)

The primary ata 80GB drive failed. I disconnected the primary and the system succesfully boots up on the secondary drive (server 2003). The drives use the Integrated Dual Channel Ultra ATA 100 ide adapter with integrated Raid 0,1, & 1+0.

Question: When I replace the primary drive will the system automaticaly mirror the drives or do I need to intercede in some fashion.
0 Kudos
Reply
1 REPLY 1
Blazhev_1
Honored Contributor

‎02-18-2008 11:11 AM

‎02-18-2008 11:11 AM

Re: ml330 g3 mirrored drives (raid 1)

Hi,

not sure, but if the rebuild don't start automatically, go into the controller BIOS during POST(when asked) and declare the new drive as a spare drive - the rebuild will start then automatically.

Regards,
Pac
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.