ML350 Gen9 and disc SSD Intel 960GB in Array P440

[Atalisha]

Hi,

i have server ML350 Gen9 with Intel SSD discs ATA LK0800GEYMU (800 GB discs), and they are ok.

One of discs failed and i put in:

SSD 960GB INTEL 2,5" DS-S4610 TLC SSDSC2KG960G801

(i cant find ATA LK0800GEYMU in seller's cause they as far as i know are EOL)

I have there RAID 1 with Spare Disc.

Array Controler P440 Rebuild the array (RAID 1) after disc change (and not showing any warning's),

but Wear Status of this disc is "Not supported" so i dont see how many time or precent left to disc fail (i know i can read it from report (ADUReport) and that is no matter for me at this moment).

My question is: If this disc fail or second member of RAID 1 array controler will be know it and transfer data to spare disc ? (i dont care about status of disc itself, but need to be sure the data is secured correctly by RAID 1 in this case).

[TVVJ]

Hello,

Please refer to section Core Options > HPE Hard Drives on the HPE ProLiant ML350 Gen9 Server's QuickSpecs for list of supported SAS and SATA hard drives.

Regards,

[Sham82]

Hello, 

As my colleague has already share the link to check the compatible Drives.

Also Non-HPE Hard Disk Drives may not work on ProLiant Servers because the Server's BIOS, iLO and Smart Array Controller Firmware may not detect a Non-HPE Hard Disk Drive

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=sf000042092en_us

Thank you
HPE