HPE Community
ProLiant Servers (ML,DL,SL)
1833309 Members
2845 Online
110051 Solutions
New Discussion

Re: ML350 reinstallation with a different disk set - how to save present array adapter config?

 
ruireis.valega
New Member

‎08-21-2006 10:08 AM

‎08-21-2006 10:08 AM

ML350 reinstallation with a different disk set - how to save present array adapter config?

Hi all,
I am considering reinstalling the OS with a different disk set for disaster recovery process documentation. Is the array data saved onto the adapter? do I need to back it up and then restore it again when I reinstall the present configuration?

Any help appreciated. Thanks.
0 Kudos
Reply
1 REPLY 1
SPa
Trusted Contributor

‎08-21-2006 06:57 PM

‎08-21-2006 06:57 PM

Re: ML350 reinstallation with a different disk set - how to save present array adapter config?

Incase you have the array configured using Smart Array, the configuration is saved on the disks.There is no option to take the configuration Backup.

You may simply remove the existing disks and mark the bays in which they are installed.

Plug in new disks and configure.

When you want to revert,take out the new Hard Drives and install the old Hard Drive in the slots they were in.Everything should come up fine.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.