HPE Community
ProLiant Servers (ML,DL,SL)
1838655 Members
3271 Online
110128 Solutions
New Discussion

Re: ML350g6 Disk Array Expansion

 
Godcandy2003
New Member

‎10-05-2011 05:32 AM

‎10-05-2011 05:32 AM

ML350g6 Disk Array Expansion

Last night after the office closed I added 2 300gb drives to the server and used the HP ACU to "expand" the array.  This morning it was finished but still shows the array size as 836gb.  There are 6 300gb drives it should show 1300+-.  I am at a standstill on this however I need to get the extra space as I need to virtualize a server that is having hardware issues ASAP.  Any advice would be greatly appreciated.

 

Thanks

0 Kudos
Reply
1 REPLY 1
gunelius
Occasional Advisor

‎10-05-2011 01:56 PM

‎10-05-2011 01:56 PM

Re: ML350g6 Disk Array Expansion

I'm pretty sure you need to extend the logical drive after expanding the array.  This is also done within the ACU.  Lastly, you'll have to expand the volume residing on the logical drive to utilize the additional space.  What OS are you running?  You may also have to rescan the storage so the OS identifies the available space before being allowed to expand the volume.

 

Scott

 

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.