MR416i-a Geno10+ RAID Controller and Drive HBA Passthrough issue

[rmach94]

I am running into some issues with provisioning a couple HPE ProLiant DL380 Gen10 servers with the MR416i-a Gen10+ RAID controllers. For reference, the following was done so far:

• Setting the first two drives (with logical array) to RAID 1 for OS - Windows Server 2022 Datacenter. 
• Trying additional 4x 1.92 TB drives set with either Unconfigured good or JBOD to be passthru for deploying storage space direct.

The issue I have seen is that the drives still show as RAID and unwilling to be used for passthru for whatever reason. I was not sure if there are options to either order/used a new RAID controller that would allow for passthru mode and/or if there are any options to be able to move forward with S2D with the current disk controller. 

Thanks,

Ryan

[PR7]

Greetings!
Please find the MR controller user guide for creating JBOD:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00110297en_us&page=GUID-ECB35E64-45BD-40DA-89CF-7CA890A460F0.html
- Try to clear the Raid Configuration and check the status.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".