ProLiant Servers (ML,DL,SL)
1823996 Members
3494 Online
109667 Solutions
New Discussion

my hp dl 380p will not start and give error System Power Fault Detected

 
arne-1254
New Member

my hp dl 380p will not start and give error System Power Fault Detected

i tried to replace the pci risers and i cant update the firmware
the server starts for a second and then its done
and gives that error code 

"System Power Fault Detected (XR: 14 00 MID: FF 0D FC 0E C0 FF FF 32 32 0C 0C 00 9C 40 00 01 0F 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00)"

 

1 REPLY 1
huthaifa1
Senior Member

Re: my hp dl 380p will not start and give error System Power Fault Detected

Recommended Steps to Troubleshoot:
1. Disconnect Non-Essential Hardware
Unplug everything that’s not required for POST:

Remove all PCIe cards

Disconnect RAID controller, storage drives, external cables

Remove all but 1 CPU and 1 DIMM

Remove all riser boards if not needed for basic POST

Power on with minimum configuration to see if the error persists.

Try switching to CPU 2 and testing with a different RAM if the first attempt doesn't work

2. Check iLO for Logs
If iLO is accessible, go to:

iLO Web Interface → Information → Integrated Management Log (IML)

Look for any Power-related or board errors that match the timestamps of failure

3. Suspect Components
From your symptoms and the fact you've tried risers:

The problem may be with the power supply

Motherboard may be the root cause

Huthaifa Alshawiki
Technical Engineer

Jordan Data Systems LLC


Best regards,