Need to expand drives in a ML350 Gen 10

[NinaC1]

Customer needs to expand from standard 8 drives to more. Assuming we would need the proper drive cage (765756-001), as well as the cables (876491-001 and 876496-001), however, we do not know if they will need an additional RAID card as well, and if so, which one?

[support_s]

System recommended content:

1. Compaq ProLiant ML350 Setup and Installation Guide

2. Compaq ProLiant ML350 Tower-to-Rack Conversion Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[SydUmar_1 · Accepted solution]

Hello @NinaC1,
Either you can install a SAS Expander to the existing controller to install additional drives - 876907-001 or you could go with any of the Storages controllers based on your requirements - https://www.hpe.com/psnow/doc/a00021852enw.pdf?jumpid=in_pdp-psnow-qs Page number - 10. We would suggest you to reach out with a reseller for a confirmation. 

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.