NIC firmware problem

[seighalani61]

hi everyone

i have a problem with my interface card firmware in oracle linux 6.1 .  how can i solve it? if i need an update firmware , which firmware should i download ? thanks in advance

server: DL 580 G7

OS: Oracle Linux 6.1

kernel:  2.6.39-400.17.1.eluek.x86.64

[root@SDB3 x86_64]# ethtool  -i eth0
driver: netxen_nic
version: 4.0.80
firmware-version: 4.0.534
bus-info: 0000:04:00.0

[root@SDB3 x86_64]# rpm -qa |grep netxen
netxen-firmware-4.0.534-3.1.el6.noarch
 
i have these errors in /var/log/messages:
 
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: Incompatibility detected between driver and firmware version on flash. This configuration is not recommended. Please update the firmware on flash immediately
Dec  8 07:39:17 SDB3 kernel: CE: hpet increased min_delta_ns to 20113 nsec
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: Incompatibility detected between driver and firmware version on flash. This configuration is not recommended. Please update the firmware on flash immediately
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: Gen2 strapping detected
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: using 64-bit dma mask
Dec  8 07:39:17 SDB3 kernel: netxen_nic: failed card response code:0x10
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: Can't get template size 16843009
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: Failed to setup minidump rcode = -5
Dec  8 07:39:17 SDB3 kernel: netxen_nic: NX3031 Gigabit Ethernet Board S/N ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿt  Chip rev 0x42 Gigabit Ethernee
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: firmware v4.0.534 [legacy]
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: using msi-x interrupts
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.0: eth0: GbE port initialized
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: PCI INT A -> GSI 24 (level, low) -> IRQ 24
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: 2MB memory map
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: using 64-bit dma mask
Dec  8 07:39:17 SDB3 kernel: netxen_nic: failed card response code:0x10
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: Can't get template size 16843009
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: Failed to setup minidump rcode = -5
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: firmware v4.0.534 [legacy]
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: using msi-x interrupts
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.1: eth1: GbE port initialized
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: PCI INT A -> GSI 24 (level, low) -> IRQ 24
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: 2MB memory map
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: using 64-bit dma mask
Dec  8 07:39:17 SDB3 kernel: netxen_nic: failed card response code:0x10
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: Can't get template size 16843009
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: Failed to setup minidump rcode = -5
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: firmware v4.0.534 [legacy]
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: using msi-x interrupts
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.2: eth2: GbE port initialized
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: PCI INT A -> GSI 24 (level, low) -> IRQ 24
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: 2MB memory map
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: using 64-bit dma mask
Dec  8 07:39:17 SDB3 kernel: netxen_nic: failed card response code:0x10
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: Can't get template size 16843009
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: Failed to setup minidump rcode = -5
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: firmware v4.0.534 [legacy]
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: using msi-x interrupts
Dec  8 07:39:17 SDB3 kernel: netxen_nic 0000:04:00.3: eth3: GbE port initialized