HPE Community
ProLiant Servers (ML,DL,SL)
1833817 Members
2643 Online
110063 Solutions
New Discussion

No Display Not Booting

 
Ayman Altounji
Valued Contributor

‎06-25-2001 04:00 PM

‎06-25-2001 04:00 PM

No Display Not Booting

Server not powering on to boot up and there is no display. I could see the system getting power from SMPS, as all the indicator LEDs in the system board were glowing and also that I have checked the output of the power supply. The display feature is in the SFB.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎08-11-2001 04:00 PM

‎08-11-2001 04:00 PM

Re: No Display Not Booting

First you should verify that the SOB is seated good in its slot. If problem still exist and you have verified that all cards are seated good, and all hardware is COMPAQ, try clewing COOS by using switch SW1 located on the System Board(switch 2, of SW1 will clear COOS). Provided that there may have been corruption within COOS, this should allow you to now POST normally. If not, we may need to look at replacing the SOB board.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.