HPE Community
ProLiant Servers (ML,DL,SL)
1758670 Members
2122 Online
108874 Solutions
New Discussion

Re: non system disk error on proliant ml370

 
jay_181
Occasional Contributor

‎04-29-2005 02:22 PM

‎04-29-2005 02:22 PM

non system disk error on proliant ml370

fdd and cdrom are empty. sysbrd was just repl. running raid 5 on 6 drives. what's the fix?
0 Kudos
Reply
1 REPLY 1
amhakassa
Honored Contributor

‎04-29-2005 03:05 PM

‎04-29-2005 03:05 PM

Re: non system disk error on proliant ml370

Hi jay,

Go to the RBSU(Rom Based Setup Utility) or BIOS settup and make sure the in Controller boot order that the controller where your hard drives or RAID is set is in first

This is because the new systemboard have the factory default and most probabily the onboard SCSI controller is in first in the boot order and if you have a raid controller it should be first so that the hard drives be seen and OS can be loaded


Regards
Amha Kassa
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.