partition magic, raid 0+1 configuration

[Awwadeen_1]

Dear all

I need to create new D partition on my proliant DL 380 G4 server by using partition magic software,
but I have raid 0+1.
my question is this cause any impact in raid configuration

[Awwadeen_1]

any assistance please

[Matti_Kurkela]

If I understood your question correctly, and you're using the DL 380 G4's standard hardware RAID...

No, the changes in partitioning will not cause nor require changes in RAID configuration.

Partition Magic will see the logical disks as presented by the RAID hardware. As far as Partition Magic is concerned, the logical disks will behave just as if they were normal single disks.