PCI 5v full length slot

[RedBack]

Is there a current model Proliant server that accepts the 5v 33Mhz Full Length PCI card?

[Vijay_44]

ML350 G3 has a 5v Slot. Not sure is about the full length though; but by looking at the chassis design, I think it should be ok.

[RedBack]

Thanks, anything else?

[Prashant (I am Back)]

hi,

5 Volt or universal cards

Expansion Slots I/O (5 Total, 5 Available) PCI Voltage:


64-bit/100MHz, PCI 4 (4 available)
(Array model has 3 available) 3.3 Volt or universal cards


32-bit/33MHz, PCI 1 (1 available) 5 Volt or universal cards

from the following link
http://h18000.www1.hp.com/products/quickspecs/11430_div/11430_div.HTML

Regards,
Prashant S.

[RedBack]

I forgot to add that it needs to be rack mountable. The ML350 is floor standing.

[Vijay_44]

DL380 G2 - full length 64-bit/33Mhz PCI slot
Also the ML350 G3 can be rack mounted

[Prashant (I am Back) · Accepted solution]

Hi,

Vijay is right ProLiant ML350 Generation 3 Tower to Rack conversion is possible and we need following kit.

Conversion Kit 290683-B21


Where DL 380 g2 is concenred we have following details:

Primary PCI bus

* System Board Embedded PCI devices only
* PCI to ISA bridge
* 33 MHz, 133 MB/s data transfer rate
* No slots

Secondary PCI bus

* One 64 bit PCI slot
* Slot 1 on Riser board
* 5 volt at bottom of server
* 33 Mhz, 267 MB/s data transfer rate
* Remote Insight Lights-Out Edition supported

Teriary PCI bus

* Two 64 bit PCI slots
* Slot 2 and 3 on Riser Board
* Full length, 3.3 volts
* Support PCI Hot-Plug
* 66 MHz, 533 MB/s data transfer rate

So we can go with both of them.

Regards,
Prashant S.