Potential problems using same spare part and PN memory modules of different chip manufacturers

[DrKovalex]

Hello,

I have four memory modules for my ProLiant DL20 Gen9: three of them made by SK/Hynix and one by Samsung (SEC). They have same Spare Part and P/N numbers wich are fits requirements written in QuickSpecs document.

Is it ok to use them side by side or better to change SEC module to another one made by Hynix?

[TTr · Accepted solution]

> They have same Spare Part and P/N numbers...

If these are numbers from HP then the internal specs would be the same for all modules. I would use them without any concern. 

[DrKovalex]

Thank you for answer!