Proliant DL150 G6 halts randomly in POST (when turned on or on reboot)

[MaticZupancic]

I noticed that my DL150 G6 haltsfreezes randomly after enumerating all disks and USB devices.

Sometimes it says:

Auto-detecting USB Mass Storage Devices ..

00 USB mass storage devices found and configured.

and there it halts.

I need to ctrl+alt+delete to reboot and then it boots with as it should.

Any suggestions?

[Suman_1978]

Hi,

Is there DL150 G6 model from HP?

Any how I have seen this issue in DL180 G5 where the server freezes at "Auto-detecting USB Mass Storage Devices " during post.

Refer to the image attached in this post.  In the BIOS under Advanced > Console Redirection > Continue CR after POST.

If the last option (Continue CR after Post) is in ALWAYS server does not hang.

Good Luck!