Proliant dl380 g6 NO ON

[Edyuy]

Hi. Im from uruguay.
I get an old 380 g6 server, with 2 Xenon and some rams. They dont on. Inside some green ligths on port 84 and on internal battery. No beeps, only the blue led on the front for half second. I need some help. TIA

[support_s]

System recommended content:

1. HPE ProLiant DL380 G6 Sever - Document List

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Moderator edit: Updated the link.]

[rabindra11sharm · Accepted solution]

Dear Edyuy 

It is very unfortunate to hear your server issue. any ways we are here to help you to identifying issue with your server.

first step => you have to check how may Power supply installed in to the server, and after connect power PSU have any LED indication?? after power button press there is any LED indication.

Second Step = > Remove the power supply units and swap them.

Test to see if the system will boot...

If that doesn't work:

• Remove all power supplies from the chassis
• Locate the System Maintenance Switch on the motherboard - It's a set of 10 DIP switches.
• Turn switch #6 switch on.
• Insert all power supply units.
• Power on the server and allow it to idle for 3 minutes.
• Power the server off.
• Remove all power supplies.
• Return DIP switch #6 to off (original) position.
• Reinsert the power supplies.
• Power the server on.

Test to see if the system will boot...

If that doesn't work:

• Remove all power supplies from the chassis
• Turn DIP switches #1, 5 and 6 switch on.
• Insert all power supply units.
• Power on the server and allow it to idle for 3 minutes.
• Power the server off.
• Remove all power supplies.
• Return DIP switches #1, 5 and 6 to off (original) position.
• Reinsert the power supplies.
• Power the server on.

Test to see if the system will boot. 

if not Please Bring the server to minimum configuration. 1 Processor in CPU1 slot 2 sticks of RAM ( CH1 slot A and B)
Remove any Add-On cards if installed
Remove any external devices which is not necessary for POST.

If Possible Please connect with iLO web console => Integrated Management Log => csv =>save the CSV file and share with us.

Thanks & regards..

Rabindra

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.