HPE Community
ProLiant Servers (ML,DL,SL)
1827278 Members
1998 Online
109717 Solutions
New Discussion

Re: Proliant ML110 G6 does not recognize extra drives

 
Patrick Simons
Occasional Contributor

‎09-23-2010 02:11 PM

‎09-23-2010 02:11 PM

Proliant ML110 G6 does not recognize extra drives

I have bought a Proliant ML110 G6. I installed it with 8GB of memory and twee 250GB SATA drives in Raid 1. Installed is MS SBS 2008 standard. Everything runs fine.

The problem i have is that i had an server that was unstable. I have the harddrive with the backup (SATA 1TB) and have an extra HD with some extra data (1,5TB). These drives are not recognized in the Bios or on the Raid controller. How is this possible? How can i fix this?
0 Kudos
Reply
1 REPLY 1
Patrick Simons
Occasional Contributor

‎09-23-2010 03:00 PM

‎09-23-2010 03:00 PM

Re: Proliant ML110 G6 does not recognize extra drives

I found it, in the Raid controller software you have to create a new logical drive. Unfortunately i can only creat only 2 logical drives on this controller. Why is this and can i fix this?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.