Proliant ML110 Gen 10 - Install OS

[HexVortex]

I have a new Proliant ML110 and I'm installing Windows Server 2022 from a bootable USB created from the evaluation ISO. I have a single 500GB SATA SSD installed in the Proliant and I used the Smart Storage Administrator to create a logical drive. It is configured as RAID 0 and associated to "Array A". The controller is HPE Smart Array S100i SR Gen10.

I'm stuck because the Windows installer doesn't see a hard drive. What step am I missing?

[feigenL]

Hello, this is a well known behavior with this model of HPE Smart Array.

You just need to follow as instructed here:

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000294en_us

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00036381en_us

Best regards