HPE Community
ProLiant Servers (ML,DL,SL)
1757751 Members
2162 Online
108863 Solutions
New Discussion

Re: PXE Client cannot obtain IP address from my DHCP to use RDP

 
orven
Frequent Advisor

‎06-21-2006 02:08 AM

‎06-21-2006 02:08 AM

PXE Client cannot obtain IP address from my DHCP to use RDP

We installed a new Blade and hook it up in the network.

I installed RDP on one server on same subnet where my DHCP is.
The new Blade is connected to same subnet where my DHCP, RDP server is.
There is Option 60 in my DHCP.

I booted up my Blade however It cannot connect to my DHCP server.. PXE is not obtaining IP address from DHCP.


Any idea








0 Kudos
Reply
1 REPLY 1
Carlos Rubio
Advisor

‎06-21-2006 02:57 AM

‎06-21-2006 02:57 AM

Re: PXE Client cannot obtain IP address from my DHCP to use RDP

If DHCP server isn't at same server than PXE server, you might delete option 60. With RDP 2.20, at PXE Configuration Utility (PXE Server Tab), mark the option "No DHCP Server installed on PXE Server".
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.