Question for End of Support for ProLiant Series

[Specialist_K]

I would like to know the End Of Support dates for the following products

BL920S G9

DL360 G10

DL360 G7

DL360 G8

DL380 G10

DL380 G7

DL380 G8

DL380 G9

DL580 G10

DL580 G7

DL580 G8

Superdome Flex

Also, Do you have a support page where i could check for the EOS details?

regards

Jaey.

[support_s]

System recommended content:

1. Notice: ProLiant Servers -End of Life of HP ROM Configuration Utility (HPRCU)

2. Notice: HP ProLiant Servers - NC31xx-Series NICs: Support That Was Removed for All NC31xx-Series NICs (Except the NC3163) in NCDE Version 9.10 Has Been Restored for NC3123, NC3134, and NC3135 in NCDE Version 9.35 Due to Extended End of Service Life

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

Please search for your product at HPESC Portal, if its updated, you may see the EoSL.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[sgunelius]

In general, a product is retired 5 years after it is introduced and goes End of Support Life (EoSL) 5 years after that, though I still have some older equipment under support with HPE.

HPE will tell me when a product is going EoSL during renewal of support; as an example, I'm still using some MSL4048 Tape Libraries purchased in 2010 and during our last renewal were notified they could no longer be supported as of 08/31/23.  We purchased a ProLiant DL360 G4p in 2006 and were notified during the same renewal that this server could no longer be supported as of 12/31/23, so that's 17 years!

I've used Park Place Technologies site to identify EoSL dates:

https://www.parkplacetechnologies.com/eosl/hpe/

Scott