raid 10

[Ayman Altounji]

perhaps this should go to the array controller forum... but here goes
have a new ml370 that will house our acctg program.. the program vendor
wants the disks in raid 10. The server has four 9.1 gig drives and I need
to know how to set these up for raid 10. Do I need two arrays?
Any help is greatly appreciated

[Ayman Altounji]

two arrays so you know exactly which drive is mirrored too which.

[Ayman Altounji]

you'll need to add more storage - Raid 10 is raid 5 arrays (minimum of 3 disks per array) mirrored. You'd need a minimum of 6 disks to set up raid 10 (if that's what your vendor is referring to). You may want to look at an external storage box for more drives.